Single component paint remover with high extractive power for removing even more stratified paints.
STRIPP 1886 is a viscous single component neutral-activated stripper with a high capacity to remove even many layered coatings. It is particularly indicated for building supports and monuments in stone, brick cement, cast iron and other metals. It is a medium viscosity product applicable on vertical surfaces as well. It removes the majority of writing and marks provoked by spray paint and nitrocellulose, synthetic, oil, polyester and polyurethane based paints.
HOW TO USE
STRIPP 1886 is used as is: IT DOES NOT REQUIRE MIXING.
The surface to be stripped must be cleaned, degreased, and dry. The temperature should not be lower than 18° C. Lower temperatures may slow down or stop the stripping effect. Apply the product to the surface to be stripped in a uniform layer and in such a quantity that the colour of the coating to be removed disappears. Apply the product using appropriate brushes or with standard equipment furnished with a non-atomising sprayer. Let the product work for the amount of time necessary and wait for complete penetration (from 20 minutes to three hours approximately). Agitating the applied product with a soft brush will accelerate the removal of the coating. The speed of removal increases with temperature also.
REMOVAL: Remove the unreacted stripper and the detached coating with a blade. The stripped surfaces can then be rinsed with a spray of water. If necessary repeat the application of the stripper in the areas it is needed.
Do not apply the stripper on surfaces exposed to the sun.
Refer to the MSDS available upon request.
Drum of 5 kg.